TMT Bar Price

>>Raw Materials Used in TMT Bar Production

>> TMT Bars Specification!

>> Equivalent grades of TMT Bars

>> Mechanical Properties of TMT Bars

>> Chemical Properties of TMT Bars

>>TMT Bars Price 

>> Our Products

TMT Bar

TMT Steel Bar Price

Shiv Shakti Steel

Mob No:- 8447070292,9811191193,9899747099   

Email Id: sales@sssmgroup.com, info@shivshaktisteelmetals.com

>> Raw Materials Used in TMT Bar Production

The production of Thermo-Mechanically Treated (TMT) bars commences from the selection of the raw materials. To manufacture the highest quality TMT bars, iron ore, coal and limestone used in the extraction and manufacture of steel billets from the ore are required. In this light, strict quality checks are observed under these raw materials to be used in producing quality and efficient TMT bars.

The Thermo-Mechanical Treatment Process

 All the above essential steps are included in the Thermo-Mechanical Treatment process of TMT bars, which imparts certain properties that offer excellent performance to the TMT bars.

Raising the temperature of steel billets. The first step encompasses raising the temperature of steel billets to relatively high values, usually from 1100 to 1200°C. As a rule, it is done in a reheating furnace so that the temperature is the same everywhere around the surface of all the billets. So it happens that at this raised temperature, steel is more ductile and will be handled like that easily in future operations.

Quenching Process: When the required heating degree of steel billets is attained, rapid cooling or quenching of the same then takes place since water is sprayed on the billets. This promotes their reconversion in such a way that the adequate surface of the billets cools so rapidly that it becomes solidified to form a hard martensite outer layer. Inside, moderately cool, the core of the billet remains in a state of austenite structure.

>> Equivalent grades of TMT Bars 

TMT Bars, Thermo Mechanically Treated Bars, Steel Bars, Reinforcement Bars, Construction Bars, High Strength Bars, TMT Steel, Building Bars, Iron Bars, TMT Reinforcement, Structural Bars, TMT Rods, Construction Materials, TMT Construction Bars, TMT Reinforcement Bars, Reinforcing Steel Bars, TMT Iron Bars, Construction Supplies, TMT Building Materials, Steel Reinforcement, TMT Construction Materials, TMT Construction Supplies, TMT Steel Reinforcement, TMT Structural Bars, Construction SteelTMT Bars Dealers – FE 500, Fe500D, Fe 550, Fe 550D, STRUCTURAL STEEL BEAMS, ANGLE, CHANNEL, COLUMN, SECTION, TMT REBARS, BULBFLAT, TATA TISCON 500, TATA TISCON 500D TMT RE-BARS, TATA Steel Re-Bars CLASSIFICATION SOCIETY LLOYDS, DNV, ABS, BV, GL, Class NK.

Shiv Shakti Steel & Metals paints a distinguishing example of a manufacturing company for TMT Bars . Our commitment here has been extended more than manufacturing to supply and export to the global dome. “It speaks of the superior quality of TMT Bars which is of European make and whose performance exceeds far beyond different test applications.

These plates are designed in a way to meet variable uses in a range of form, finish, and size. We are also good at making the plates in a customized size and shape as per the demand of the application. These plates are remarkable in a way with inherent properties and sustain in chloride, a mild cyclic situation that generally gets corrosive. TMT Bars have shown stability in the most hostile environments and last even during abrasive situations since they cannot wear or tear away.

Theirs is the life of a survivor even when exposed to different types of chemicals, such as sulphuric, phosphoric, nitric, organic, and inorganic acids. More than that, the plates resist oxidation due to the ability to form protective layers. The TMT Bars assure high peak strength owing to the high tensile grade steel available in various grades of TMT bars including FE 500, FE 500D, FE 550, FE 550D, and many more.

It caters to the industry that is strong enough to bear a high capacity load with high tensile strength. Due to durability, these plates hold a high load pressure for long working hours. Such steel plates are used for machine building most usually, but not limited to, container construction, steel structures, bridge construction, vehicle construction, transport, mobile equipment, and automobile production, as well as for general machines and architectural applications.

Focus hardness, tensile, flaring, and flattening tests, mechanical and chemical tests, PMI tests, and visual inspection with the attached control measures and third-party inspections are instituted and become a commitment that shall ensure their use for a long time without giving their input to be damaged.

TMT BAR

Mechanical Properties of TMT Bars

Tensile Strength: It is one of the elite mechanical properties defining the maximum tensile stress that a material can experience up to just before breaking. Hence, an enactment of high tensile strength for a TMT bar will be in such a way that it supports the capability to bear heavy loads.

Yield Strength: The point above which the material cannot bear greater stress and regains its original shape after the stoppage of the stress activity. TMT bars are excellent in yield strength where the material is guaranteed against structural sound and may, later on when the stress is released or removed from it, return to its original shape.

Elongation: Elongation refers to the material’s ability to stretch before breaking finally. In general, TMT bars possess good elongation properties, meaning the nature of TMT bars is ductile. This turns out to be one of the key properties in structures that are in the requirement of flexibility, mostly in demand in seismic zones.

Chemical Properties of TMT Bars

Therefore, such chemical properties linked to TMT bars become practical parameters regarding the structural integrity and performance of TMT bars in construction applications. Such attributes are always a reflection of the steel composition utilized in the manufacturing process. Listed below are the key chemical properties associated with TMT bars:

Carbon (C):

The greatest factor of strength and hardness in steel is its carbon content. In TMT bars, the carbon percentage is controlled and monitored so it acquires perfect equilibrium in its strength and ductility.

Manganese (Mn):

Manganese also presents an increment in the hardenability of steel simultaneously with adding to the strength of steel. TMT bars have manganese to ensure such properties are optimized within the TMT bars but only within some specified limits.

Sulfur (S): Controlled sulphur maintained to allow better machinability of steel. TMT bars usually have controlled sulphur so that the good workability can be retained, even at the time of fabrication.

TMT Bars PRICE

55 Per Kg approx
  • TMT Bars
  • TMT Round Bar
  • Mild Steel TMT Bars
  • TMT Steel Bars
  • Iron TMT Bar

TMT Bars Specification :

Item:  TMT Bars
Thickness: 1mm-300mm
Width: 1000mm-2500mm
Length: 3000mm-18000mm

People Also Searched For

TMT Bars Dealers – FE 500, Fe500D, Fe 550, Fe 550D, STRUCTURAL STEEL BEAMS, ANGLE, CHANNEL, COLUMN, SECTION, TMT REBARS, BULBFLAT, TATA TISCON 500, TATA TISCON 500D TMT RE-BARS, TATA Steel Re-Bars
CLASSIFICATION SOCIETY LLOYDS, DNV, ABS, BV, GL, Class NK.

STOCKISTS & TRADERS