Corten Steel, IRSM 41

CORROSION RESISTANT AND WEATHER RESISTANT STEEL CAN BE SUPPLIED ACCORDING TO FOLLOWING STANDARD & SPECIFICATIONS :

Corten Steel Supplier

Prime suppliers of Corten & Weathering Steel across India

  • CORTEN A, CORTENA, CORTEN A, CORTEN-A, CORTEN A
  • CORTEN B, CORTENB, CORTEN B, CORTEN-B, CORTEN B
  • ASTM A588 Grade A, ASTM A 588 Grade-A, ASTM A-588 Grade A
  • ASTM A588 Grade B, ASTM A 588 Grade-B, ASTM A-588 Grade B
  • ASTM A588 Grade C, ASTM A 588 Grade-C, ASTM A-588 Grade C
  • ASTM A242 Type 1, ASTM A242 Type-1, ASTM A-242 Type 1
  • S355JOWP EN 10025-5, S355JOWP EN10025-5, S355 JOWP EN-10025-5
  • S355JOWP+N EN 10025-5, S355JOWP+N EN10025-5, S355 JOWP+N EN-10025-5
  • S355J2W EN 10025-5, S355J2W EN10025-5, S355 J2W EN-10025-5
  • S355J2W+N EN 10025-5, S355J2W+N EN10025-5, S355 J2W+N EN-10025-5
  • S355J2G1W EN 10155, S355J2G1W EN10155, S355 J2G1W EN-10155
  • S355K2G1W EN 10155, S355K2G1W EN10155, S355 K2G1W EN-10155
  • S355J2G2W EN 10155, S355J2G2W EN10155, S355 J2G2W EN-10155
  • S355K2G2W EN 10155, S355J2G2W EN10155, S355 K2G2W EN-10155
  • SAILCOR IRSM 41, IRSM 41, IRSM 41 FOR RAILWAY WAGON & CONTAINERS

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3

 SailCor, SAIL Corten Steel, Uttam Value Corten Steel, Llyod Corten Steel, JSW Corten Steel, Essar Corten Steel, Corten A, Corten Steel, Corten Steel India.
Corten – A ASTM 588 Grade A ASTM 242 TYPE -1     IRSM 41 -97
Carbon, Max 0.12 0.19 0.15 0.10
Manganese 0.20-50 0.80-1.25 1.00 0.25-0.45
Phosphorus 0.07-0.15 0.04 0.15 0.07-0.11
Sulphur, max 0.030 0.05 0.05 0.030
Silicon 0.25-0.75 0.30-0.65 0.25-0.40 0.28-0.72
Nickel, max 0.65 0.40 0.20-0.49
Chromium 0.50-1.25 0.40-065 0.30-0.50
Molybdenum, max
Copper 0.25-0.55 0.25-0.40 0.20 min 0.30-0.39
Vanadium 0.02-0.10 0.050
Aluminimum 0.030
CORTEN A, ASTM 588 GR.A, ASTM 242 TYPE-1, JISG 3125 SPA-H, IRSM 41-97 Weather & Corrosion Resistant Steel Mechanical Properties
 Tensile Strength Min. Yield Point Elongation
CORTEN A [470 – 630 MPa] [355 MPa] 20 % min
ASTM 588 GR. A [485 MPa] [345 MPa] 21% min
ASTM 242 TYPE -1 [480 MPa] [345 MPa] 16% min
IRSM 41- 97 [480 MPa] [340 MPa] 21% min
We can supply : Thickness from 0.8 mm to 50mm
Width : from 750mm to 1500mm
Length : upto 12,000mm

We are one of the biggest corten steel suppliers & stockist and have huge variety ready to serve you:

Thickness: 0.5mm-100mm

Width: 800mm-3000mm

 

Weathering steel, best-known under the trademark CORTEN steel and sometimes written without the hyphen as “Corten steel”, is a group of steel alloys which were developed to obviate the need for painting, and form a stable rust-like appearance if exposed to the weather for several years.

United States Steel Corporation (USS) holds the registered trademark on the name CORTEN.[1] Although USS sold its discrete plate business to International Steel Group (now Arcelor-Mittal) in 2003,[2] it still sells CORTEN branded material in strip-mill plate and sheet forms.

The original CORTEN received the standard designation A 242 (“CORTEN A”) from the ASTM International standards group. Newer ASTM grades are A 588 (“CORTEN B”) and A 606 for thin sheet. In Indian Standards is applicable as per IRSM 41. All alloys are in common production and use.

Properties
“Weathering” means that due to their chemical compositions, these steels exhibit increased resistance to atmospheric corrosion compared to unalloyed steels. This is because the steel forms a protective layer on its surface under the influence of the weather.

The corrosion-retarding effect of the protective layer is produced by the particular distribution and concentration of alloying elements in it. The layer protecting the surface develops and regenerates continuously when subjected to the influence of the weather. In other words, the steel is allowed to rust in order to form the ‘protective’ coating.

ASTM A 242
The original A 242 alloy has a yield strength of 50,000 pounds per square inch (340,000 kPa) and ultimate tensile strength of 70,000 psi (480,000 kPa) for light-medium rolled shapes and plates up to 0.75 inches (19 mm) thick. It has yield strength of 46,000 psi (320,000 kPa) and ultimate strength of 67,000 psi (460,000 kPa) for medium weight rolled shapes and plates from 0.75–1 inch (19–25 mm) thick. The thickest rolled sections and plates – from 1.5–4 in (38–100 mm) thick have yield strength of 42,000 psi (290,000 kPa) and ultimate strength of 63,000 psi (430,000 kPa).

ASTM A 588
A 588 has a yield strength of at least 50,000 psi (340,000 kPa), and ultimate tensile strength of 70,000 psi (480,000 kPa) for all rolled shapes and plate thicknesses up to 4 in (100 mm) thick. Plates from 4–5 in (100–130 mm) have yield strength at least 46,000 psi (320,000 kPa) and ultimate tensile strength at least 67,000 psi (460,000 kPa), and plates from 5–8 in (130–200 mm) thick have yield strength at least 42,000 psi (290,000 kPa) and ultimate tensile strength at least 63,000 psi (430,000 kPa).

IRSM 41
IRSM 41 Steel: Body panel of Coal Wagons like BOXNHA encounter corrosive environment due to presence of sulphur and other carbonoic acid components in coal. Use of corrosion resistance steel to IRSM-41 will face the situation better due to formation of an adherent protective oxide film on the surface if it is left undisturbed.

IRSM 41 steel has following properties-
n Stronger than mild steel
n Easily weldable
n Develops its own protective film against corrosion.